IMCA 305 Sprint Car Oil Filter Guide: What to Run and Why Thread Size Matters
May 18, 2026IMCA 305 sprint cars run the most competitive open-wheel class in American grassroots racing. The 305 small block Chevy engine — running on gasoline, naturally aspirated — operates at sustained high RPM in a lightweight car on dirt surfaces that create significant vibration loads on all powertrain components including the oil filter. The correct filter for this application needs to be sized correctly for the thread pitch, rated for the structural demands of sprint car operation, and available at a price that makes weekly changes viable.
Engines: 305ci Small Block Chevy, 305ci SBC IMCA Spec | Classes: IMCA 305 Sprint Car, Weekly 305 Sprint, Hobby Sprint, Sport Compact Sprint
Spec Comparison: Costa COF40 vs WIX 51061R vs FRAM PH5
| Spec | Costa COF40 | WIX 51061R | FRAM PH5 |
|---|---|---|---|
| Thread Size for 305 SBC | 13/16-16 UNF | 13/16-16 UNF | 13/16-16 UNF |
| Filtration Efficiency | 20µ @ 98% | 27µ @ 95% | 35µ @ 90% |
| Bypass Valve Pressure | 13 psi | 11 psi | 8–10 psi |
| Burst Pressure Rating | > 500 psi | 350 psi | ~200 psi |
| Canister Vibration Resistance | Race-spec welds | Racing line | Street-rated |
| Anti-Drain-Back Valve | Yes — silicone | Yes | Yes — rubber |
| Price Per Filter | ~$18 | ~$13 | ~$8 |
The 305 SBC Thread Size: 13/16-16 UNF
The small block Chevy 305 uses the same oil filter thread as the 350, 400, and most other GM small block variants: 13/16-16 UNF. This is the same thread that the COF40 is designed for, making it a direct fitment on any 305 sprint car running the standard oil filter mount location.
Some 305 sprint car setups use a remote mount filter bracket to position the filter in a better-cooled or more accessible location. For remote mount applications, the filter still uses the adapter thread — 13/16-16 UNF — so the COF40 remains the correct filter. Only if the remote mount adapter has been swapped to 3/4-16 UNF (uncommon) would you need the COF1 instead.
Why Vibration Resistance Matters in Sprint Car Applications
Sprint car chassis transmit more vibration to powertrain components than almost any other short track racing application. The engine, transmission, and rear end sit in a thin-rail chassis that transfers track surface irregularities directly to the drivetrain. An oil filter mounted at the standard engine location experiences this vibration continuously during the feature.
A street-rated oil filter canister — like FRAM PH5 — is welded to specifications that assume a car frame with significant vibration damping between the engine and the chassis. In a sprint car, there is minimal damping. The canister needs to be welded to race-specification seam strength to resist the vibration-induced fatigue that can occur over a full season of sprint car racing. The COF40 is built to that specification; the FRAM PH5 is not.
IMCA Rules and Filter Selection
IMCA 305 sprint car rules do not specify an oil filter brand or model — filter selection is open within the constraint of the 305 engine specification. This means competitors are free to run any oil filter that fits the 305 SBC thread pattern.
The practical implication: there is no rules-based reason to run a street filter on an IMCA 305 sprint car. The COF40 is fully legal in all IMCA sprint programs and provides race-grade protection that street filters cannot match. Engine builders who prep IMCA 305 motors consistently recommend COF40 (or equivalent racing-grade filter) for weekly sprint car competition.
Change Interval for IMCA 305 Sprint
For IMCA 305 sprint car competition, the recommended interval is to change the oil and filter every race night. A sprint car race night typically includes hot laps, heat races, and a feature — 30 to 60 minutes of sustained high-RPM operation. Running the same filter through multiple events risks running degraded media and a potentially compromised anti-drain-back valve on a class where the engine is the most expensive single component.
Case buying COF40 at the start of the season eliminates the supply issue and brings the per-filter cost down. A case covers a full season at weekly intervals with filters to spare.
Verdict
For IMCA 305 sprint cars, the COF40 is the correct filter — direct 13/16-16 UNF thread fitment, race-spec canister construction built for sprint car vibration loads, 20-micron filtration at 98% efficiency, and a 13 psi bypass threshold that keeps oil filtered at racing RPM. Change every race night. Buy by the case to manage costs. The COF40 is built for exactly this application.

