FRAM CH8278 Replacement — Costa COF5315 Oil Filter Element (Direct Cross, In Stock)
May 25, 2026Looking for a FRAM CH8278 cartridge-style oil filter element? You are not alone — these cartridges have been backordered through major distributors for months, and FRAM’s overall availability situation is not improving.
Costa COF5315 (Costa part number COF-21503E) is the direct cartridge replacement. The element diameter, height, and end-cap geometry match the FRAM CH8278 envelope, so the cartridge drops into the existing OEM filter housing the same way the CH8278 did. No housing modifications, no adapter rings, no surprises.
The Costa COF5315 uses a precision-pleated synthetic fiber media with a higher pleat count than the cellulose-blend media in the standard FRAM cartridge. More pleats translate to more surface area, lower restriction at the same flow rate, and longer service life before the bypass valve has to open. Filtration efficiency is rated at 20 microns at 98% compared to roughly 30–35 microns at 90% for the FRAM equivalent.
Cartridge filters depend heavily on the end-cap seal to keep dirty oil from bypassing the element internally. Costa uses nitrile end-cap seals bonded to glass-reinforced nylon end caps — the same construction used in OEM cartridge filters. The FRAM equivalent uses a softer rubber seal that can take a permanent set after a few heat cycles, allowing internal bypass that is not visible from the outside but shows up as accelerated wear at teardown.
This cartridge is intended for VOLVO XC90 S80 S60 S40(OLD) V40. The OEM number cross-references include the relevant manufacturer part numbers below — confirm your housing matches one of the listed OEMs and the Costa COF5315 drops straight in.
Costa is built to the ISO/TS 16949 quality-system standard. If your shop or your race team needs a reliable supply of this cartridge size, Costa is in stock and shipping today.
Why Costa COF5315 Beats the FRAM CH8278
- Direct cross-reference for FRAM CH8278 — OEM-spec fitment
- Precision-pleated synthetic media — higher surface area
- OEM-grade nitrile end-cap seals (no internal bypass)
- Costa part number COF-21503E
- Application: VOLVO XC90 S80 S60 S40(OLD) V40
- ISO/TS 16949 OEM-grade quality system
- In stock and shipping — no FRAM CH8278 backorder wait
Fitment / Application
VOLVO XC90 S80 S60 S40(OLD) V40
OEM cross-reference: 1275811 · 1275810
Dimensions (H × OD × Thread): 80*77*32


