Best Oil Filters for Dirt Track & Weekly Racing: Street Stock, Modified, Hobby Stock & Pure Stock Guide

May 1, 2026 By Costa Oil Filters Team

Weekly dirt track racing is where most American motorsports careers begin — and where the most money gets wasted on oil filters that weren’t built for the job. Street Stock, Pure Stock, and Hobby Stock racers tend to run whatever oil filter they can grab on a Friday afternoon before the Saturday program. Modified and Limited Late Model teams sometimes do the same, especially on tight budgets. This guide cuts through the confusion and gives you a direct recommendation for every weekly dirt track class — with the reasoning behind each one, so you understand why it matters and not just what to buy.

Engines: GM 602 Sealed Crate, GM 604 Sealed Crate, Small Block Chevy (street stock spec), Honda GX200 (4-cylinder class), LS-Based (open modified)  |  Classes: Street Stock, Modified, Pure Stock, Hobby Stock, 4-Cylinder Class, Limited Late Model, Dirt Modified, IMCA-Sanctioned Classes

Spec Comparison: Costa COF40 / COF2222 / COF4622 vs WIX Racing Series (varies by class) vs FRAM PH5 / PH2 (not recommended)

Spec Costa COF40 / COF2222 / COF4622 WIX Racing Series (varies by class) FRAM PH5 / PH2 (not recommended)
Class Type Recommended Costa Filter WIX Alternative FRAM (Not Recommended)
Street Stock / Pure Stock (GM crate) COF40 51061R (acceptable) PH5 (street grade only)
Limited Late Model (602/604) COF40 51061R (acceptable) PH5 (not race-spec)
Modified / Open SB Chevy COF1 51515R (acceptable) PH8 (not race-spec)
Dirt Modified (LS-based) COF2222 57060 (acceptable) PH2 (not race-spec)
4-Cylinder / Honda GX200 class COF4622 51365R (acceptable) No cross available
IMCA Hobby Stock (street motor) COF40 or COF2222 Varies by thread Avoid in race use
Typical service interval Multi-event race duty rated Race weekend Single event maximum
Budget per filter $11–$18 $10–$14 $7–$10

Street Stock and Pure Stock — The Class Where Filter Choice Matters Most

Street Stock and Pure Stock classes typically run street-sourced engines or lightly built motors on a minimal budget. That budget pressure is exactly why racers in these classes default to FRAM PH5 or whatever OEM cross is on the shelf — and exactly why it’s the wrong call. A Street Stock motor running wide open at the local 3/8-mile for 30 laps generates more sustained heat and pressure in the oil than that same engine would see in a year of daily driving. The COF40 for 13/16-16 UNF applications (GM 602/604, most SB Chevy street motors) is a direct drop-in that costs $4–6 more than a FRAM PH5 and provides synthetic media filtration, a higher bypass valve, and a burst-tested canister. In a class where the engine is the most expensive part of the car, it’s the easiest money you’ll spend.

Modified and Limited Late Model — The Middle Ground That Gets Ignored

Modified and Limited Late Model racers tend to spend money on chassis and engine work, then economize on consumables. A WIX 51515R is a reasonable choice for the 3/4-16 UNF thread common in open SB Chevy and modified applications — it’s a genuine racing-line filter with better bypass and media than FRAM. But the COF1 is the race-spec upgrade that protects the investment in a more expensive motor. The COF1’s 20-micron synthetic media and 13 psi bypass are particularly relevant in Modified class engines that run harder valve spring pressures and more aggressive camshaft profiles than a sealed crate — generating more metallic particulate per hour that needs to be caught before it recirculates.

4-Cylinder and Honda GX200 Classes — Don’t Skip the Filter

Entry-level 4-cylinder and Honda GX200 spec classes often run minimal maintenance schedules because the engines are inexpensive. That reasoning backfires: the GX200 has a small oil sump, tight bearing clearances, and runs in dirty environments with significant airborne contamination. Filtration efficiency matters more per displacement, not less. The COF4622 covers the M20×1.5 thread used on GX200 and similar small 4-stroke race engines. There’s no FRAM equivalent in this thread spec — which actually simplifies the choice. It’s either the COF4622 or a WIX 51365R. The COF4622 wins on every filtration metric.

IMCA-Sanctioned Classes — What the Rules Say About Oil Filters

IMCA (International Motor Contest Association) sanctions a wide range of weekly classes including Modified, Sport Modified, Stock Car, and Hobby Stock. Most IMCA engine rules specify the OEM-equivalent oil filter or allow approved racing-line replacements. For IMCA Modified class engines using 13/16-16 or 3/4-16 UNF filter threads, Costa COF40 and COF1 are compliant racing-line replacements. For LS-based IMCA classes using M22×1.5 thread, COF2222 is the correct racing cross for AC Delco PF48E. Always verify current season rules with your IMCA regional director before running a non-OEM filter in a sealed engine class — but in open-engine classes, the Costa lineup is accepted as a performance racing filter.

The Case for Buying a Case

For any racer running weekly programs, the best value in oil filtration is buying a case of 10. Costa Racing filters are available by the case at significant per-unit savings. At $2.50–3.50 per filter savings on a 10-pack, a single season’s worth of filters (4–6 race weekends, one change per weekend) more than pays back the upfront cost difference versus buying individual filters at the parts store. You also avoid the Friday-afternoon scramble for whatever cross-reference is on the shelf. A case in the trailer is the correct inventory strategy for any weekly racer.

Verdict

For weekly dirt track racing in any class, there’s a Costa filter that fits your engine, thread, and budget. COF40 for GM crate classes and SB Chevy street stock. COF1 for open modified and DART-based builds. COF2222 for LS-powered classes. COF4622 for Honda GX200 spec classes. Run them by the case, change them on schedule, and stop gambling your season on a $7 street filter that wasn’t designed for what you’re putting it through.

Buy the Costa COF40 / COF2222 / COF4622 →