GM CT525 LS3 Race Engine Oil Filter Guide: Costa COF2222 vs WIX 57060
May 9, 2026The GM CT525 LS3 is the official crate engine of multiple road racing series including SCCA World Challenge and various endurance programs. At 525+ horsepower, M22×1.5 thread spec, and sustained road course load profiles, the CT525 requires a filter that can handle significantly different operating conditions than the crate engines common in oval short-track racing.
The standard OEM reference for the LS M22×1.5 filter is WIX 57060 and FRAM PH2. Costa COF2222 is the race-spec alternative in the same thread spec. This guide compares all three for CT525 and LS-platform road racing applications.
Engines: GM CT525 LS3, LS1, LS2, LS3 Custom Race Build, LS-Based Open Engine | Classes: SCCA Club Racing, NASA Road Racing, Endurance Racing, Super Late Model (LS), High-Performance Street/Strip
Spec Comparison: Costa COF2222 vs WIX 57060 vs FRAM PH2
| Spec | Costa COF2222 | WIX 57060 | FRAM PH2 |
|---|---|---|---|
| Thread Size | M22 × 1.5 | M22 × 1.5 | M22 × 1.5 |
| Filter Height | 3.75″ | 3.75″ | 3.69″ |
| Filtration Efficiency | 20µ @ 98% | 25µ @ 95% | 25µ @ 89% |
| Bypass Valve Pressure | 13 psi | 11 psi | 8–10 psi |
| Media Type | Synthetic fiber | Cellulose blend | Cellulose blend |
| Thermal Rating | 300°F+ synthetic | Lower cellulose limit | Lower cellulose limit |
| Burst Pressure | 500+ psi | 350 psi | 300 psi |
The CT525 LS3: Operating Profile and Filter Demands
The CT525 LS3 produces 525 horsepower at sustained road course RPM. Unlike dirt oval crate engines that cycle from cold staging to full load and back, road course racing puts the engine under high sustained load for extended periods — multi-hour endurance races, 25–45 minute sprint races, and practice sessions with minimal cool-down between hot laps.
This sustained high-load profile creates consistently high oil temperatures. In endurance racing, oil temperatures of 230–260°F are common for race-length durations. At these temperatures, cellulose-blend filter media — which begins to degrade above approximately 200–225°F sustained — can release particles back into the oil rather than retaining them.
COF2222’s synthetic fiber media maintains its structural integrity at 300°F+, meaning it continues to capture and hold particles at rated efficiency throughout a 3-hour endurance race rather than degrading in the final hour when oil temperatures are at their peak.
WIX 57060 vs Costa COF2222: The Media Difference
Both WIX 57060 and Costa COF2222 are sold as high-performance filters for LS platform applications. The difference is in media construction.
WIX 57060 uses a cellulose-blend media rated at approximately 25µ. For street-duty LS applications and weekend track days with occasional hot laps, it performs adequately. For sustained road racing load profiles — particularly endurance events — the cellulose blend’s thermal limits become relevant.
COF2222 uses 100% synthetic fiber media rated at 20µ @ 98% efficiency. Synthetic media does not absorb moisture or degrade from thermal cycling the way cellulose does. In a 3-hour endurance race with 6–8 pit stops and multiple engine restarts from cold or warm soak, COF2222’s synthetic media maintains consistent particle capture across all operating temperature ranges.
For DE events, track days, and sprint race applications where the engine does not sustain maximum temperature for extended periods, the difference is smaller. For true endurance racing, synthetic media is the correct choice.
FRAM PH2 for LS Racing: Not Recommended
FRAM PH2 is a street-grade filter sold in the same M22×1.5 thread as the CT525. It is widely available and inexpensive. It is also the worst option of the three for any sustained high-load LS racing application.
FRAM PH2’s 8–10 psi bypass valve opens almost immediately in cold oil conditions, sending unfiltered cold oil to the bearings at every startup. Its cellulose-blend media has the lowest thermal stability of the three filters and the lowest burst pressure rating at approximately 300 psi. In an engine producing 525 horsepower under sustained load, 300 psi burst pressure is uncomfortably close to sustained peak oil pressures.
For occasional track days where you arrive from the street and do 5–8 laps before cooling down, FRAM PH2 will not cause immediate engine failure. For a 3-hour endurance race, it is not an appropriate choice.
Change Intervals for CT525 Road Racing Applications
The CT525 LS3 in road racing applications should follow these oil and filter change intervals:
Sprint racing programs (25–45 minute races): Change oil and filter every race weekend if the engine ran at race pace. For testing and DE-only events, every 2 hours of on-track time.
Endurance programs: Change oil and filter at every scheduled pit stop if the race runs longer than 3 hours. For shorter endurance events (1–2 hours), change before and after each race.
Defer to your engine builder’s specific recommendations for CT525 builds — some builders recommend more frequent intervals depending on oil type and internal clearances. The CT525 is a sealed crate engine in many series, and oil change is one of the few maintenance variables within the racer’s control.
Verdict
For GM CT525 LS3 road racing applications, COF2222 is the correct filter. Its 20µ synthetic media, 13 psi bypass valve, and 300°F+ thermal rating make it the appropriate specification for sustained high-temperature endurance and sprint race duty. WIX 57060 is an acceptable alternative for lighter-duty track applications. FRAM PH2 is a street filter and should not be used in sustained road race applications.

